MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 111
the default setting).
For example, extension 500 want to leave a message for extension 501, users
can use 500 dial ―#501‖ to enter the voicemail of 501.
·Voicemail main menu
Users can go to the main menu by dialing *02 (*02 is the default setting).
·Attended Transfer
Users may transfer an incoming call by dialing *3 on their phone (*3 is the
default setting).
·Attended Transfer Timeout
The timeout value of transferring a call
·Blind Transfer
Users may blind transfer an incoming call by dialing*03 on their phone (*03 is
the default setting).
·Call Pickup
Users may pick up an incoming call by dialing *4 on their phone (*4 is default
the setting)
·Extension Pickup
Users may pick up a specific extension‘s incoming call by dialing *04+extension
number on their phone (*04 is the default setting)
·Intercom
Define the feature code that is used to dial an extension in intercom mode. For
instance, setting this value to *5 would allow you to initiate an intercom call with
extension 501 by dialing *5501.
·Normal Spy
In this mode, you can only listen to the extension being spied, for example you
can dial *90501 to monitor extension 501
·Whisper Spy
In this mode you can listen/whisper to the extension being spied, for example,
dialing *91501 to listen to extension 501, you can also talk with 501 too.
·Barge Spy
In this mode, you can barge in both extensions involved in the call, for example
dialing *92501 to barge in and talk with extensions on both sides.
To Next Page
Loading...
Need help?
General
