MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 112
2) Call Parking Preferences
·Call Parking
User may park an incoming call on his own telephone by pressing ―*6‖ (*6 is the
default setting)
·Extension range used to park calls
User may park an incoming call on a designated extension at first and then pick
up the call again on any other extensions.
·Number of seconds a call can be parked before it is recalled.
Define the time (in seconds) that a call can be parked before it is recalled to the
station that parked it.
3) Call Forwarding Preferences
·Reset to Defaults
Users may reset all call forwarding defaults by calling *70 on their phone (*70
is the default setting).
Note: When reset to defaults. The call forwarding settings will be configured as
follows:
Always forward: Disabled
Busy forward to Voicemail: Enabled
No answer forward to Voicemail: Enabled
Do not disturb: Disabled
·Enable Forward All Calls
Users may enable always forward by calling *71 on their phone (*71 is the
default setting)
·Disable Forward All Calls
Users may disable always forward by calling *071 on their phone (*071 is the
default setting)
·Enable Forward When Busy
Users may enable busy forward by dialing *72 on their phone (*72 is the default
setting)
·Disable Forward When Busy
Users may disable busy forward by calling *072 on their phone (*072 is the
default setting)
·Enable Forward No Answer
Users may enable no answer forward by calling *73 on their phone (*73 is the
default setting)
To Next Page
Loading...
Need help?
General
