Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 150
Figure 1-5
Note: If it‘s for remote extension, a static public IP address is needed to input
instead.
1.2.4 Security Configuration for Remote Extensions
PBXExtensionsFXS/VoIP Extensions VoIP ExtensionsGeneral
Enable ―NAT‖ and ―Register remotely‖ like the picture shown below.
Figure 1-6
Note:
1. If remote registration isn‘t required, please disable it.
2. If extensions register to MyPBX via WAN port, please only enable ―register
remotely‖.

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English