Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 156
Name: RTP_ALL
Protocol: UDP
Port: 10000:12000
IP: 0.0.0.0/0.0.0.0
Action: Accept
Figure 2-6
In this case, MyPBX can get rid of one-way volume issue.
Step5. Add common rules to accept the static public IP
range of NTP, SMTP, and POP server.
We recommend opening all ports for NTP, SMTP, and POP server in MyPBX‘s
firewall, and the IP address should be a static one or it belongs to a range. If it‘s
Dyndns, there is no need to configure this rule, but the IP blacklist should be
kept, and ―Drop All‖ should not be ticked.
For example, the SMTP server is 110.30.1.123.
Name: Allow_SMTP
Protocol: BOTH
Port: 1:65535
IP: 110.30.1.123/255.255.255.255
Action: Accept

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English