MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 61
format of phonebook should be *.xml.
Note: All the existing phonebooks of the IP phone will be replaced automatically
if the phonebooks are configured in this way.
6.1.2.4 Configure phone
Let's take provisioning Yealink phone as an example.
There are two modes to create new phones: create new phones in webpage and
upload the IP Phone‘s configuration file.
Add new phone via webpage
Click ―Add Phone‖ and fill in the corresponding information in the pop-up
window.
Figure 6-13 Configure Yealink T28
1) General
·Enabled
Choose yes or no to enable or disable this extension.
·New Config
If your IP phone‘s firmware version is above x.70.x.x, you should select ―Yes‖.
To Next Page
Loading...
Need help?
General
