Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 62
Or else, it should be ―No‖.
· MAC address
Input the MAC address of the IP phone.
·Name
Put the name of this Phone here.
·Manufacturer
You can choose the Manufacturer of the IP phone.
·Phone Type
Choose the model of your phone. Only for snom phone.
·Call Waiting
This call feature allows your phone to accept other incoming calls to an
extension already in an active call.
·Key as Send
Configure a key as the send key, you choose #, * or disable this feature
·Auto redial
Enable or disable the auto redial for the IP Phone.
·Auto answer
Enable or disable auto answer for the IP phone.
·Phone book
Enable or disable the feature of phone book for the IP phone.
·Line
You can set each line of IP phone for the account you want, active or not.
Extension: Select the extension number for IP Phone.
Label: It is shown on the LCD for users to identify the account.
Line Active: You can choose on/off to enable/disable the account respectively.
2) Codecs
In this page, we can set the codecs for the IP phone.

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English