YOKOGAWA AQ1215A - Page 115

6-7
IM AQ1210-01EN
Analyzing Waveforms
1
2
3
4
5
6
7
8
9
10
11
App
Index
2 Point Markers (when the marker mode is Line)
7.
Tap the 2 Point Markers soft key. A soft key menu for the 2 markers method appears.
Marker n
Return loss
Splice loss between
markers
Set the cursor link
(OFF, ON).
See the previous page.
Marker E
Cursor operation
When you tap on the data
screen or turn the rotary
knob, a cursor appears
that you can move.
Marker n operation
When you tap on the
data screen or turn the
rotary knob, marker n
appears that you can
move.
Marker E operation
When you tap on the data
screen or turn the rotary
knob, marker E appears
that you can move.
Set the approximation
method.
See section 2.3.
Note
• When you set the markers, set them so that the n marker is on the measurement start point (distance
reference) side.
• The measured loss value differs depending on the specified approximation method.
6.1 Operating Cursors and Markers