7-25
IM AQ1210-01EN
Using the Utility Feature
7
Measuring the Optical Power
6.
Set the transmission direction.
7.
Connect an optical fiber cable to the OPM port. The measured value is displayed on the power
meter screen. For the position of the OPM port, see “Component Names and Functions” in the
Getting Started Guide, IM AQ1210-02EN.
Soft Key Menu (PON power meter)
8.
Tap the soft key menu display button. An PON power meter soft key menu appears.
PON Power Meter Menu
Holds the measured value
display
Saves data
A screen appears for saving the results of optical power measurements
for multi-fiber cables. See page 7-23.
7.4 Using the PON Power Meter (/PPM option)
To Next Page
Loading...
