YOKOGAWA AQ1215A User Manual

11-3
IM AQ1210-01EN
Troubleshooting, Updating, and Storage
1
2
3
4
5
6
7
8
9
10
11
App
Index
Code Message
567 Judgement failure.
The radius of fiber is too small.
568 Judgement failure. Unfocused.
602 Can not recognize file system.
-Internal memory : Contact Yokogawa's representatives.
-USB memory : Try the other media or format again with FAT
605 Same file name or folder name exists.
608 Invalid file name or folder name
612 Invalid path name
614 Unknown file or folder
620 Free space is not enough
623 Folder is not empty.
629 Writing to USB memory is not allowed.
636 Failed to delete the folder. The hierarchy below the specified folder is too deep.
641 Failed to copy the folder. The hierarchy below the specified folder is too deep.
645 The path name is too long.
646 USB memory can not be recognized
648 Can not make file or folder in this folder. (Max 550 files/folder)
649 Failed to copy the file or folder. Same path source and destination.
700 Failed to open the file.
701 Failed to close the file.
702 Failed to read the file.
703 Irregular file format.
704 Failed to write the file.
705 Cannot be saved. No trace data.
708 Cannot be saved. This data is not taken with this instrument.
710 File cannot be retrieved. Invalid wavelength
711 File cannot be retrieved. Invalid distance range
712 File cannot be retrieved. Invalid pulse width
713 File cannot be retrieved. Invalid sampling points
714 File cannot be retrieved. Distance range exceeds 400km.
715 File cannot be retrieved. Sampling intervals exceed 64m.
716 File cannot be retrieved. Actual averaging times or duration is not set.
717 Duplicate file name.
718 File is damaged. Check the file.
719 File name too long. Maximum length is 60 letters.
720 File is now being accessed. Execute after access is released.
721 Cannot load this file. Invalid file format or this firmware version is old.
722 Recall Setup File cannot load the measurement condition which sampling interval has been changed to shorter
than the standard sampling interval at Meas. Range Change function.
723 This file cannot be supported by the firmware with this product. Please update into the latest firmware to read this
file.
724 The model name of the instrument and model name in the file is different. This file cannot be read with this
instrument.
725 Can't use the following characters. \ / : ; * ? " < > | % . ,
726 This file cannot be read with this instrument. This file that tries to be loaded includes the measurement condition
that cannot be measured with this instrument.
727 This file cannot be read with this instrument. This file that tries to be loaded includes the measurement condition
that cannot be measured with this instrument. - Distance Range
728 This file cannot be read with this instrument. This file that tries to be loaded includes the measurement condition
that cannot be measured with this instrument. - Pulse Width
732 ID No. is not selected in File Name. Please include ID No. in File Name if using direct save(Select ID).
819 ROM Test Error occurred.
820 RAM Test Error occurred.
821 System File Test Error occurred.
822 Battery Test Error occurred.
823 Temperature Test Error occurred.
824 Power Supply Test Error occurred.
825 WLAN Test Error occurred.
854 In USB Storage mode, all keys are locked. Please disconnect the USB Cable.
902 Battery is low. Please power it off, and charge the battery or replace the battery. Or, please use the power supply.
903 Backup battery is low Please contact Yokogawa's representatives.
11.2 Error Message Display

YOKOGAWA AQ1215A Specifications

General

Brand	YOKOGAWA
Model	AQ1215A
Category	Test Equipment
Language	English