YOKOGAWA AQ1215A - Page 53

2-15
IM AQ1210-01EN
Setting Up the OTDR Feature
1
2
3
4
5
6
7
8
9
10
11
App
Index
Configure the work completion notification.
5.
Tap Work Completion Notice Setup to display the Work Completion Notice Setup screen.
Set the notification (OFF, ON).
Set the message display at work completion
(OFF, ON).
Set the confirmation message (OFF, ON).
Set how to display the message confirming
whether you have moved the cursor to the
work completion point.
Set the alarm sound at work completion
(OFF, ON).
Explanation
Marker Mode
Markers
Move the cursor to the location that you want to measure, and set a marker. When you are
measuring return loss and splice loss, they are calculated automatically when you set all the
markers that are necessary for the measurement method that you are using. For instructions on
how to use markers, see section 6.1.
Example of 4 Point Markers: Marker
1 2 3
2.3 Display (OTDR) Conditions