2-18
IM AQ1210-01EN
Marker Information
You can display the distance from the measurement reference point to each marker on the waveform
display area.
OFF: Marker information is not displayed.
ON: Marker information is displayed.
Reflection Display (when the suffix code is -HJ)
You can set the reflection display at the calculation result display area of measurement data to either
of the following settings.
Return loss: The ratio of the incident optical power level and the reflected optical power level is
displayed.
Reflection level: The reflected optical power level is displayed.
2.3 Display (OTDR) Conditions
To Next Page
Loading...
