YOKOGAWA AQ1215A User Manual

2-24
IM AQ1210-01EN
Setting the File Name
5.
Tap File Name Setup to display the File Name Setup screen.
Set the parts of the file name
(ID No., Wavelength, Distance Range, Pulse Width, Comment 1 to Comment 10, Company Name,
Name, Cable ID, Fiber ID, Cable Code, Originating Loc (A), Terminating Loc (B)).
1
10
Set the items that will be displayed into parts to of the file name.
Set the separator
( , _ _ ,
~ ~
,
^ ^
).
1 2 3 1 2 3
1 2 3 1 2 3
Set the tape
number type.
(Off, a-b(2), a-c(3),
a-d(4), a-e(5), a-f(6),
a-g(7), a-h(8))
Set the tape number
start character.
Set, within the
specified tape number
type range, the tape
number start character
that will be attached to
the file name.
Set comments.
See page 2-27.
Set the ID number
(0 to 9999).
File name that will
be assigned
Setting the Direct Save Method
5.
Tap Direct Save Setup to display the Direct Save Setup screen.
Set the file type
(*.SOR, *.pdf, *.SOR+*.PDF).
Set the save action (Direct Save, Select ID).
Set the action to be taken when you tap the save icon of the
displayed waveform on the measurement screen.
The selected save destination
is displayed.
Displays the file list of the folder shown in Save Folder.
For details on file operations, see section 9.6.
2.4 File Conditions

YOKOGAWA AQ1215A Specifications

General

Brand	YOKOGAWA
Model	AQ1215A
Category	Test Equipment
Language	English