5-5
IM AQ1210-01EN
Analyzing Events
5
• Deleting an Event
7.
Tap the Rotary Knob soft key to select Event.
8.
Turn the rotary knob to select the event you want to delete.
9.
Press the Del.Event (Event) soft key. The selected event is deleted.
The color of the selected event changes.
The event is deleted virtually. When the event
is deleted, the subsequent event numbers
are each decreased by one.
The deleted event is deleted from the event list.
Note
• If only the S point and the E event are displayed, you cannot delete any events.
• If you delete an event, the subsequent event numbers will all be reduced by one.
• You cannot delete the S point.
5.1 Analyzing in TRACE Mode
To Next Page
Loading...
Need help?
General
