5-32 <5. Functions of CQ1 Software>
IM 80J01A01-01E
(7) Time-lapse Condition
Set time-lapse imaging setting in Normal mode
Interval
Set the interval of time-lapse measurement in seconds. The
specified time and acquisition time are shown on the right.
Duration
Specify the total number of repetitions. The total time is shown on
the right.
Renewal Button
Display total image number and total file volume. By clicking this
button, total file volume and total image number are renewed.
If HDD space is not enough, display warning sign.
Total image number
(Total file volume)
To Next Page
Loading...
