Command Function Page
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:DFRequency:VALue?
Queries the frequency value between peak values of the FFT computation. 5-49
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:DV?
Queries all settings related to the power value between peak values of the
FFT computation.
5-49
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:DV:STATe
Turns ON/OFF the power value between peak values of the FFT computation
or queries the current setting.
5-49
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:DV:VALue?
Queries the power value between peak values of the FFT computation. 5-49
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:FREQuency<x>?
Queries all settings related to the peak frequency value of the FFT
computation.
5-49
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:FREQuency<x>:STATe
Turns ON/OFF the peak frequency value of the FFT computation or queries
the current setting.
5-49
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:FREQuency<x>:VALue?
Queries the peak frequency value of the FFT computation. 5-49
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:RANGe<x>
Sets the measurement range of the peak value of the FFT computation or
queries the current setting.
5-50
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:V<x>?
Queries all settings related to the peak value of the FFT computation. 5-50
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:V<x>:STATe
Turns ON/OFF the peak value of the FFT computation or queries the current
setting.
5-50
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:V<x>:VALue?
Queries the peak value of the FFT computation. 5-50
:ANALysis:FFT<x>:MEASure:PEAK:
CALCulation?
Queries all settings related to calculation items of the FFT computation. 5-50
:ANALysis:FFT<x>:MEASure:PEAK:
CALCulation:ALL
Turns ON/OFF all calculation items of the FFT computation. 5-50
:ANALysis:FFT<x>:MEASure:PEAK:
CALCulation:DEFine<x>
Sets the equation of the calculation item of the FFT computation or queries
the current setting.
5-50
:ANALysis:FFT<x>:MEASure:PEAK:
CALCulation:STATe<x>
Turns ON/OFF the calculation items of the FFT computation or queries the
current setting.
5-51
:ANALysis:FFT<x>:MEASure:PEAK:
CALCulation:VALue<x>?
Queries the measured value of the calculation item of the FFT computation. 5-51
:ANALysis:FFT<x>:RANGe
Sets the measurement source window used in the FFT computation or
queries the current setting.
5-51
:ANALysis:FFT<x>:RPARt (Real
Part)
Sets the source trace of the real part of the FFT computation or queries the
current setting.
5-51
:ANALysis:FFT<x>:RPOSition (Ref
Position)
Sets the center point of magnification of the vertical axis of the FFT
computation or queries the current setting.
5-51
:ANALysis:FFT<x>:VERTical?
Queries all settings related the vertical axis of the FFT computation. 5-51
:ANALysis:FFT<x>:VERTical:LEVel
Sets the display position of the vertical axis of the FFT computation or
queries the current setting.
5-51
:ANALysis:FFT<x>:VERTical:MODE
Sets the vertical axis mode of the FFT computation or queries the current
setting.
5-51
:ANALysis:FFT<x>:VERTical:
SENSitivity
Sets the vertical sensitivity of the FFT computation or queries the current
setting.
5-52
:ANALysis:FFT<x>:WINDow
Sets the window function of the FFT computation or queries the current
setting.
5-52
:ANALysis:TYPE<x>
Sets the analysis function type or queries the current setting. 5-52
:ANALysis:VTDisplay
Turns ON/OFF the VT waveform display or queries the current setting. 5-52
:ANALysis:WAIT<x>?
Waits for the completion of the automated measurement with a timeout
option.
5-52
:ANALysis:WPARameter<x>?
Queries all settings related to the waveform parameter measurement
function.
5-52
:ANALysis:WPARameter<x>:
CALCulation
Sets the calculation items of the automated measurement of waveform
parameters or queries the current setting.
5-53
:ANALysis:WPARameter<x>:
HISTogram?
Queries all settings related to the histogram display of the waveform
parameter measurement.
5-53
:ANALysis:WPARameter<x>:
HISTogram:MEASure?
Queries all settings related to the automated measurement of the histogram
display of the waveform parameter measurement.
5-53
:ANALysis:WPARameter<x>:
HISTogram:MEASure:CURSor?
Queries all settings related to the cursor measurement on the histogram of
the waveform parameter measurement.
5-53
:ANALysis:WPARameter<x>:
HISTogram:MEASure:CURSor:ALL
Turns ON/OFF all histogram cursors of waveform parameter measurement. 5-54
5.1 List of Commands
To Next Page
Loading...
Need help?
General
