YOKOGAWA DL9040 User Manual

5-3
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
Command Function Page
:ANALysis:FFT<x>:LENGth
Sets the number of FFT points of the FFT computation or queries the current
setting.
5-44
:ANALysis:FFT<x>:MAXHold
Turns ON/OFF the maximum value hold function of the FFT computation or
queries the current setting.
5-44
:ANALysis:FFT<x>:MEASure?
Queries all settings related to the automated measurement of the FFT
computation.
5-44
:ANALysis:FFT<x>:MEASure:
MARKer?
Queries all settings related to the marker cursor measurement of the FFT
computation.
5-45
:ANALysis:FFT<x>:MEASure:
MARKer:BASic?
Queries all settings related to basic items of the marker cursor of the FFT
computation.
5-45
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:ALL
Turns ON/OFF all basic items of the marker cursor of the FFT computation. 5-45
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:DFRequency?
Queries all settings related to the frequency value between marker cursors
of the FFT computation.
5-45
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:DFRequency:STATe
Turns ON/OFF the frequency value between marker cursors of the FFT
computation or queries the current setting.
5-45
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:DFRequency:
VALue?
Queries the frequency value between marker cursors of the FFT
computation.
5-45
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:DV?
Queries all settings related to the power value between marker cursors of the
FFT computation.
5-46
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:DV:STATe
Turns ON/OFF the power value between marker cursors of the FFT
computation or queries the current setting.
5-46
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:DV:VALue?
Queries the power value between marker cursors of the FFT computation. 5-46
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:FREQuency<x>?
Queries all settings related to the frequency value of the marker cursor of the
FFT computation.
5-46
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:FREQuency<x>:
STATe
Turns ON/OFF the frequency value of the marker cursor of the FFT
computation or queries the current setting.
5-46
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:FREQuency<x>:
VALue?
Queries the frequency value of the marker cursor of the FFT computation. 5-46
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:POSition<x>
{<NRf>}
Sets the marker cursor position of the FFT computation or queries the
current setting.
5-46
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:V<x>?
Queries all settings related to the power value of the marker cursor of the
FFT computation.
5-47
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:V<x>:STATe
Turns ON/OFF the power value of the marker cursor of the FFT computation
or queries the current setting.
5-47
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:V<x>:VALue?
Queries the power value of the marker cursor of the FFT computation. 5-47
:ANALysis:FFT<x>:MEASure:
MARKer:CALCulation?
Queries all settings related to calculation items of the marker cursor of the
FFT computation.
5-47
:ANALysis:FFT<x>:MEASure:
MARKer:CALCulation:ALL
Turns ON/OFF all calculation items of the marker cursor of the FFT
computation.
5-47
:ANALysis:FFT<x>:MEASure:
MARKer:CALCulation:DEFine<x>
Sets the equation of the calculation items of the marker cursor of the FFT
computation or queries the current setting.
5-47
:ANALysis:FFT<x>:MEASure:
MARKer:CALCulation:STATe<x>
Turns ON/OFF the calculation items of the marker cursor of the FFT
computation or queries the current setting.
5-47
:ANALysis:FFT<x>:MEASure:
MARKer:CALCulation:VALue<x>?
Queries the measured value of the calculation items of the marker cursor of
the FFT computation.
5-48
:ANALysis:FFT<x>:MEASure:MODE
Sets the automated measurement mode of the FFT computation or queries
the current setting.
5-48
:ANALysis:FFT<x>:MEASure:PEAK?
Queries all settings related to the peak value measurement of the FFT
computation.
5-48
:ANALysis:FFT<x>:MEASure:PEAK:
BASic?
Queries all settings related to basic items of the peak value of the FFT
computation.
5-48
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:ALL
Turns ON/OFF all basic items of the peak value of the FFT computation. 5-48
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:DFRequency?
Queries all settings related to the frequency value between peak values of
the FFT computation.
5-48
:ANALysis:FFT<x>:MEASure:PEAK[:
BASic]:DFRequency:STATe
Turns ON/OFF the frequency value between peak values of the FFT
computation or queries the current setting.
5-49
5.1 List of Commands

YOKOGAWA DL9040 Specifications

General

Brand	YOKOGAWA
Model	DL9040
Category	Test Equipment
Language	English