Command Function Page
:FILE:SAVE:{ASCii|BINary|FLOat}
:HISTory
Sets whether to save the entire data or the selected data of specific data or
queries the current setting.
5-89
:FILE:SAVE:{ASCii|BINary|FLOat}
:LENGth
Sets the size of waveform data to save for each type of data or queries the
current setting.
5-89
:FILE:SAVE:{ASCii|BINary|FLOat}
:TRACe
Sets the trace of specific data to be saved or queries the current setting. 5-89
:FILE:SAVE:COMMent
Sets the comment of data to be saved or queries the current setting. 5-89
:FILE:SAVE:DMEMory:TRACe
Sets the trace to be saved as accumulated data or queries the current
setting.
5-90
:FILE:SAVE:NAME
Sets the name of the data file to be saved or queries the current setting. 5-90
:FILE:SAVE:ZWAVe:ZONE
Sets the zone of the zone data to be saved or queries the current setting. 5-90
GONogo Group
:GONogo?
Queries all settings related to GO/NO-GO determination. 5-91
:GONogo:ABORt
Aborts the GO/NO-GO determination. 5-91
:GONogo:ACTion?
Queries all settings related to the action taken when the determination result
is NO-GO and the criteria values.
5-91
:GONogo:ACTion:BUZZer
Sets whether to sound a buzzer when the determination result is NO-GO or
queries the current setting.
5-91
:GONogo:ACTion:HCOPy
Sets whether to print the screen image on the printer when the determination
result is NO-GO or queries the current setting.
5-91
:GONogo:ACTion:MAIL?
Queries all settings related to the mail transmission when the determination
is NO-GO.
5-91
:GONogo:ACTion:MAIL:INTerval
Sets the interval at which to send mail when the determination is NO-GO or
queries the current setting.
5-91
:GONogo:ACTion:MAIL:MODE
Sets whether to send mail when the determination is NO-GO or queries the
current setting.
5-91
:GONogo:ACTion:SAVE
Sets whether to save the waveform data to the storage medium when the
determination result is NO-GO or queries the current setting.
5-92
:GONogo:CONDition<x>
Sets the GO/NO-GO determination criteria or queries the current setting. 5-92
:GONogo:COUNt?
Queries the actual number of GO/NO-GO determinations. 5-92
:GONogo:EXECute
Executes the GO/NO-GO determination. This is an overlap command. 5-92
:GONogo:LOGic
Sets the GO/NO-GO determination logic or queries the current setting. 5-92
:GONogo:MODE
Sets the GO/NO-GO determination type or queries the current setting. 5-92
:GONogo:NGCount?
Queries the actual number of NO-GOs of the GO/NO-GO determination. 5-92
:GONogo:SCONdition? (Stop
Condition)
Queries all settings related to the determination termination condition. 5-92
:GONogo[:SCONdition]:NGCount
Sets the number of NO-GOs that terminates the GO/NO-GO determination
or queries the current setting.
5-92
:GONogo[:SCONdition]:STOPcount
Sets the acquisition count that terminates the GO/NO-GO determination or
queries the current setting.
5-92
:GONogo:TELecomtest?
Queries all settings related to telecom test determination. 5-92
:GONogo:TELecomtest:SELect<x>?
Queries all settings related to the condition of the telecom test determination. 5-92
:GONogo:TELecomtest:SELect<x>:
EYEPattern?
Queries all settings related to the eye pattern determination of the condition. 5-93
:GONogo:TELecomtest:SELect<x>:
EYEPattern:<Parameter>
Sets the upper and lower limits of the waveform parameter of the eye pattern
determination or queries the current setting.
5-93
:GONogo:TELecomtest:SELect<x>:
MASK?
Queries all settings related to the mask determination of the condition. 5-93
:GONogo:TELecomtest:SELect<x>:
MASK:ELEMent<x>?
Queries all settings related to the element used in the mask determination. 5-93
:GONogo:TELecomtest:SELect<x>:
MASK:ELEMent<x>:PSPCount(Sample
Point Count %)
Sets the upper and lower limits of the error rate for the number of sampled
data points of the element or queries the current setting.
5-93
:GONogo:TELecomtest:SELect<x>:
MASK:ELEMent<x>:PWCount (Wave
Count %)
Sets the upper and lower limits of the error rate for the number of acquisitions
of the element or queries the current setting.
5-93
:GONogo:TELecomtest:SELect<x>:
MASK:ELEMent<x>:SPCount (Sample
Point Count)
Sets the upper and lower limits of the number of sampled data points for the
element that results in error or queries the current setting.
5-94
:GONogo:TELecomtest:SELect<x>:
MASK:ELEMent<x>:WCOunt (Wave
Count)
Sets the upper and lower limits of the number of acquisitions for the element
that results in error or queries the current setting.
5-94
5.1 List of Commands
To Next Page
Loading...
