Command Function Page
:GONogo:ZPARameter:SELect<x>:
WINDow
Sets the source window of the zone determination or queries the current
setting.
5-99
HCOPy Group
:HCOPy? (Hard COPY)
Queries all settings related to the output of screen data. 5-100
:HCOPy:ABORt
Aborts data output and paper feeding. 5-100
:HCOPy:DIRection
Sets the data output destination or queries the current setting. 5-100
:HCOPy:EXECute
Executes the data output. This is an overlap command. 5-100
:HCOPy:EXTPrinter?
Queries all settings related to the external printer output. 5-100
:HCOPy:EXTPrinter:TONE
Sets the half tone of the external printer output or queries the current setting. 5-100
:HCOPy:EXTPrinter:TYPE
Sets the type of output commands to send to the external printer or queries
the current setting.
5-100
:HCOPy:FILE?
Queries all settings related to file output. 5-100
:HCOPy:FILE:FORMat
Sets the file output image format or queries the current setting. 5-100
:HCOPy:FILE:SAVE?
Queries all settings related to the saving of file output. 5-100
:HCOPy:FILE:SAVE:ANAMing
Sets the type of auto naming of save destination file names or queries the
current setting.
5-101
:HCOPy:FILE:SAVE:CDIRectory
(Change Directory)
Sets the save destination directory name or queries the current setting. 5-101
:HCOPy:FILE:SAVE:NAME
Sets the save destination file name or queries the current setting. 5-101
:HCOPy:NETPrint?
Queries all settings related to network printer output or queries the current
setting.
5-101
:HCOPy:NETPrint:TONE
Sets the half tone for the network printer or queries the current setting. 5-101
:HCOPy:NETPrint:TYPE
Sets the output command type for the network printer or queries the current
setting.
5-101
:HCOPy:PRINter?
Queries all settings related to the built-in printer output. 5-101
:HCOPy:PRINter:HRMode
Turns ON/OFF the high resolution mode of the built-in printer output or
queries the current setting.
5-101
HISTory Group
:HISTory?
Queries all settings related to the history function. 5-102
:HISTory:CURRent?
Queries all settings related to the history function of the current waveform
(CH1 to 4, M1 to 8).
5-102
:HISTory[:CURRent]:DISPlay
Sets the start number and end number of the display record of the history
waveform or queries the current setting.
5-102
:HISTory[:CURRent]:DMODe
(Display Mode)
Sets the display mode of the history waveform or queries the current setting. 5-103
:HISTory[:CURRent]:MODE
Sets the highlight display mode of the history waveform or queries the
current setting.
5-103
:HISTory[:CURRent]:RECord
Sets the target record of the history waveform or queries the current setting. 5-103
:HISTory[:CURRent]:RECord?
MINimum
Queries the minimum record number of the history waveform. 5-103
:HISTory[:CURRent]:REPLay?
Queries all settings related to the replay function of the history function. 5-103
:HISTory[:CURRent]:REPLay:JUMP
Jumps the history waveform to the specified record number. 5-103
:HISTory[:CURRent]:REPLay:SPEed
Sets the replay speed of the history waveform or queries the current setting. 5-103
:HISTory[:CURRent]:REPLay:STARt
Starts the replay of the history waveform in the specified direction. 5-103
:HISTory[:CURRent]:REPLay:STOP
Stops the replay of the history waveform. 5-103
:HISTory[:CURRent]:SEARch?
Queries all settings related to the history search function. 5-104
:HISTory[:CURRent][:SEARch]:
ABORt
Aborts the history search. 5-104
:HISTory[:CURRent][:SEARch]:
EXECute
Executes the history search. This is an overlap command. 5-104
:HISTory[:CURRent][:SEARch]:
LOGic
Sets the history search logic or queries the current setting. 5-104
:HISTory[:CURRent][:SEARch]:
RESet
Resets the search conditions of the history search. 5-104
:HISTory[:CURRent][:SEARch]:
SELect<x>?
Queries all settings related to the history search condition. 5-104
:HISTory[:CURRent][:SEARch]:
SELect<x>:CONDition
Sets determination criteria of the history search condition or queries the
current setting.
5-104
:HISTory[:CURRent][:SEARch]:
SELect<x>:MODE
Sets the mode of the history search condition or queries the current setting. 5-104
5.1 List of Commands