5-32
IM DLM4038-17EN
Command Function Page
:SERialbus<x>:PSI5[:ANALyze]:SE
Tup:DATA:DBITs
Sets or queries the data length for PSI5 signal analysis. 5-200
:SERialbus<x>:PSI5[:ANALyze]:SE
Tup:DATA:EDETection
Sets or queries the error detection method for PSI5 signal analysis. 5-200
:SERialbus<x>:PSI5[:ANALyze]:SE
Tup:DATA:SNRejection
Queries all PSI5 signal analysis noise rejection settings. 5-201
:SERialbus<x>:PSI5[:ANALyze]:SE
Tup:DATA:SNRejection:ETIMe
Sets or queries the rejection end time for PSI5 signal analysis noise
rejection.
5-201
:SERialbus<x>:PSI5[:ANALyze]:SE
Tup:DATA:SNRejection:MODE
Sets or queries the on/off status of the PSI5 signal analysis noise rejection. 5-201
:SERialbus<x>:PSI5[:ANALyze]:SE
Tup:DATA:SOURce
Sets or queries the data source for PSI5 signal analysis. 5-201
:SERialbus<x>:PSI5[:ANALyze]:SE
Tup:NUMBerofslot
Sets or queries the number of slots for PSI5 signal analysis. 5-201
:SERialbus<x>:PSI5[:ANALyze]:SE
Tup:SLOT<y>
Sets or queries the slot’s start and end times for PSI5 signal analysis. 5-201
:SERialbus<x>:PSI5[:ANALyze]:SE
Tup:SYNC
Sets or queries the sync signal for PSI5 signal analysis. 5-201
:SERialbus<x>:PSI5:DETail?
Queries all PSI5 signal analysis list settings. 5-202
:SERialbus<x>:PSI5:DETail:DISPl
ay
Sets or queries the display mode for the PSI5 signal analysis list. 5-202
:SERialbus<x>:PSI5:DETail:LIST:
ALL?
Queries all the data for all analysis numbers in the PSI5 signal analysis result
list.
5-202
:SERialbus<x>:PSI5:DETail:LIST:
ITEM?
Queries all items that will be displayed in the PSI5 signal analysis result list. 5-202
:SERialbus<x>:PSI5:DETail:LIST:
VALue?
Queries all the data for the specified analysis number in the PSI5 signal
analysis result list.
5-202
:SERialbus<x>:PSI5:SEARch?
Queries all PSI5 signal search settings. 5-202
:SERialbus<x>:PSI5:SEARch:ABORt
Aborts the PSI5 signal search. 5-202
:SERialbus<x>:PSI5:SEARch:EXECu
te
Executes a PSI5 signal search. 5-202
:SERialbus<x>:PSI5:SEARch:SELe
ct
Sets which detected point to display in the PSI5 signal search zoom window
and queries the zoom position of the detected point.
5-202
:SERialbus<x>:PSI5:SEARch:SET
up?
Queries all PSI5 signal search condition settings. 5-202
:SERialbus<x>:PSI5:SEARch[:SETu
p]:DATA?
Queries all PSI5 signal data search settings. 5-202
:SERialbus<x>:PSI5:SEARch[:SETu
p]:DATA:DATA?
Queries all data settings of the PSI5 signal data search. 5-202
:SERialbus<x>:PSI5:SEARch[:SETu
p]:DATA:DATA:CONDition
Sets or queries the comparison condition of the PSI5 signal data search. 5-203
:SERialbus<x>:PSI5:SEARch[:SETu
p]:DATA:DATA:DECimal<y>
Sets or queries the data of the PSI5 signal data search in decimal notation. 5-203
:SERialbus<x>:PSI5:SEARch[:SETu
p]:DATA:DATA:HEXa
Sets the data of the PSI5 signal data search in hexadecimal notation. 5-203
:SERialbus<x>:PSI5:SEARch[:SETu
p]:DATA:DATA:PATTern
Sets or queries the data of the PSI5 signal data search in binary notation. 5-203
:SERialbus<x>:PSI5:SEARch[:SETu
p]:DATA:DATA:PFORmat
Sets or queries the data input format of the PSI5 signal data search in binary
notation.
5-203
:SERialbus<x>:PSI5:SEARch[:SETu
p]:DATA:FRAMeinslot?
Queries all slot specification settings of the PSI5 signal data search. 5-203
:SERialbus<x>:PSI5:SEARch[:SETu
p]:DATA:FRAMeinslot:MODE
Sets or queries the slot specification condition (enabled/disabled) of the PSI5
signal data search.
5-203
:SERialbus<x>:PSI5:SEARch[:SETu
p]:DATA:FRAMeinslot:SNUMber
Sets or queries the slot number of the PSI5 signal data search. 5-204
:SERialbus<x>:PSI5:SEARch[:SETu
p]:ERRor?
Queries all PSI5 signal error search settings. 5-204
:SERialbus<x>:PSI5:SEARch[:SETu
p]:ERRor:CLOCk
Sets or queries the PSI5 signal clock error search. 5-204
:SERialbus<x>:PSI5:SEARch[:SETu
p]:ERRor:FNUMber
Sets or queries the PSI5 signal frame number error search. 5-204
:SERialbus<x>:PSI5:SEARch[:SETu
p]:ERRor:FRAMe
Sets or queries the PSI5 signal frame error search. 5-204
5.1 List of Commands
To Next Page
Loading...
