30
IM FG410-01EN
4. BASIC OPERATION
Settingarea
This area is used to display and set the various parameters.
When multiple display formats can be selected, display format switch tabs are displayed on the left
side of the screen.
p.31
Due to the large number of setting parameters in the case of modulation, sweep, and burst oscillation,
the setting screen consists of two or three pages. The screen pages can be switched with the NEXT
key.
NEXT
Switching setting
screen pages with
the NEXT key
When there are several setting screen
pages, an icon indicating which page
is displayed appears at the top center
of the screen.
In the example on the left, there is a
total of two setting screen pages, and
the icon indicates that the second
page is currently displayed.
Softkeydisplayarea
Displays the functions of the soft keys allocated according to the status.
If five or more soft keys are allocated, “▼n/m” is displayed over the right-most soft key. This
indicates that the set of soft keys belonging to the current setting screen extends of m stages, and that
the set corresponding to the nth stage is currently displayed. When the soft key over which “▼ n/m”
is displayed is pressed, the next set of soft keys is displayed.
Indicates that the first of two
stages of soft keys is displayed.
When this key is pressed, the
next stage of soft keys is
displayed.
Indicates that there are several
setting screen pages, which can
be switched with the NEXT key.
Setting screen page position
display icon.
To Next Page
Loading...
Need help?
General