YOKOGAWA FG420 - Page 5

III
IM FG410-01EN
Application
1. DETAILSOFPARAMETER-VARIABLEWAVEFORMS
Explains the meanings of each parameter of parameter-variable waveforms and waveform
examples.
2. CREATINGARBITRARYWAVEFORMS
Explains how to input and edit arbitrary waveforms from the panel control.
3. HANDYUSEOF2-CHANNELDEVICE(FG420ONLY)
Explains how to operate two channels at the same time.
4. SYNCHRONIZINGMULTIPLEUNITS
Describes how to configure a multi-phase oscillator by connecting multiple units of this product.
5. USINGEXTERNALFREQUENCYREFERENCE
Describes how to use external frequency reference.
6. USINGSEQUENCEOSCILLATION
Describes how to set and operate sequence oscillation.
7. USINGUSER-DEFINEDUNITS
Explains the units that can be optionally set by users.
8. OTHERUTILITYSETTINGS
Explains how to set display and operational details.
9. TROUBLESHOOTING
Explains error messages and how to respond to cases where a failure is suspected.
10.MAINTENANCE
Explains the operational inspection and performance test.