YOKOGAWA GX20 - Page 28

1-8
IM 04L51B01-01EN
2. Measurement Settings
Set the scan interval.
Procedure
On the setting menu, tap Measurement settings and then Scan interval.
Description
1
1 Set the scan interval.
3. Recording Settings
Specify the settings for recording measured data.
Set the recording conditions for each file type, display data and event data.
Basic Setup
Procedure
On the setting menu, tap Recording settings and then Basic settings.
Description
When the File Type Is Display Data
1
2
1 Tap File type and then Display.
2 Set the interval for saving data files of display data.
The les are divided with the interval specied here.
SetupGuide(Readthisfirst)