16
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 04L51B01-01EN June. 14, 2017-00
SLMPCOMMUNICATION(MitsubishiPLC)(/E4)
CC-LinkfamilySLMPcommunicationprotocol
function,whichenablesconnectionfromaGX
to Mitsubishi Electric PLCs without sequencer
programs.
TheGXoperatesasanSLMPclient.WritingGX
measurement data to a PLC and reading PLC
data into communication channels* are possible.
* Thecommunicationchannelfunction(/MCoption)
is required.
•
Numberofconnectiondestinationservers:16max.
• Readcycle:100ms/200ms/500ms/1s/2s/5s/10s/2
0s/30s/1min
• Communicableinternaldata:
Specialrelay(SM),specialregister(SD),input
(X), output (Y), internal relay (M), latch relay (L),
annunciator(F),edgerelay(V),linkrelay(B),
dataregister(D),linkregister(W),timercontact
(TS), timer coil (TC), current timer value (TN),
integration timer contact (SS), integration timer
coil (SC), current integration timer value (SN),
counter contact (CS), counter coil (CC), current
counter value (CN), special link relay (SB),
speciallinkregister(SW),directaccessinput
(DX),directaccessoutput(DY),indexregister
(Z),leregister(R,ZR),extendeddataregister
(D),extendedlinkregister(W)
Devicecodeisindicatedinparentheses.
Programcontrolfunction(/PG)
SeeGX90UTPIDControlModuleGeneral
Specications(GS04L53B01-31EN)