YOKOGAWA GX20 - Page 647

12
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 04L52B01-01EN June. 14, 2017-00
SERIALCOMMUNICATIONINTERFACE(/C2,/C3)
• Connection:EIARS-232(/C2)orEIARS-
422/485(/C3)
• Protocol:Dedicatedprotocol,Modbus/RTU,or
DARWINcompatiblecommunication
• Setting/measurementserverfunction:Operation,
settingoroutputofmeasurementdataare
availablebydedicatedprotocol.
• Synchronization:Start-stopsynchronization
• Transmissionmode(RS-422/485):
RS-422:Four-wirehalf-duplexmulti-drop
connection (1:n (n = 1 to 31))
RS485:Two-wirehalf-duplexmulti-drop
connection (1:n (n = 1 to 31))
• Baudrate:1200,2400,4800,9600,19200,
38400, 57600, or 115200 bps
• Datalength7or8bits
• Startbit:1bit
• Stopbit:1bitor2bit
• Parity:ODD,EVEN,orNONE
• HandshakingOff:Off,XON:XON,XON:RS,and
CS: RS
• Communicationdistance;RS-422/485:1200m
(57600bpsorless),600m(115200bps)
 RS-232:15m
• Modbus/RTUcommunication:Readingorwriting
ofmeasurementdataonotherinstrumentsis
availablebyModbusprotocol.
 Communicationchannelfunctionoption(/MC)
isneededtoreadmeasurementdatafromother
instruments.
• Operationmodes:Masterorslave
• Executionofacommunicationcommandusinga
barcode:Theenteredtextcanbeexecutedasa
communicationcommand.
CUSTOMDISPLAY(/CG)
 UsingDXA170DAQStudio,screencreation
software,acustomscreencanbeconstructedand
displayedinwhichdisplaycomponents(suchas
trend,digital,andbargraphs)arefreelyplaced.
 ThescreendataistransferredfromDAQStudioto
theinternalmemoryviacommunication,orloaded
fromanexternalmediumtotheinternalmemory
and displayed.
• Numberofscreens:30(internalmemory)
• Displaycomponents:
• Normalcomponents(digitalvalue,bar
graph,tagNo.,tagcomment,simpledigital
value,simplebargraph,alarmmark,unit,
alarmindicator,lower-limitspanvalue,
upper-limitspanvalue,groupname,
systemicon,memorysamplebar,date/time
view,batchname,andusername)
• Trendcomponents(trendgroupdisplay
(with scale board))
• Listcomponents(alarmlistviewand
messagelistview)
• Operationcomponents(DO(DOoperable),
internal switch (internal switch operable),
numericvalueoperations(viewingdata
ofandwritingdatatocommunication
channels), and button operations (writing
numericvalues,operatingbits,switching
screens,andexecutingcommunication
commands)
• Textcomponents(labels)
• Figurecomponents(lineview,rectangle
view,andcircleview)
• Imagecomponents(PNGimagedata)
• Batchcomponents(Batchnumber,Lot
number,Texteld,Batchcomment,Batch
groupnumber*)
* OnlyonGPwiththeMultibatchfunction(/
BT option)
• Controlcomponent(controller,control
alarmindicator,externalcontroller)
• Conguringscreens:Screencreationsoftware
 CreationusingDXA170DAQStudio(GPdoes
nothaveacreationfunction)
• Saving/loadingscreendata:
 Aspeciedscreenorallthescreensis/are
loadedfromanexternalstoragemediumtothe
internalmemory,oraspeciedscreenorallthe
screensintheinternalmemoryis/aresavedon
anexternalstoragemedium.
VGAVIDEOOUTPUT(/D5)(OnlyforGP20)
• Externaldisplay:
 Resolution:800×600dots(VGA)
 Connector:15-pinD-Sub(female)
EtheNet/IPCOMMUNICATION(PLC
communicationprotocol)(/E1)
 CanbejoinedtoanEthernet/IPnetworkasan
adapter(oraserver).
• LoadingdatafromtheI/Ochannelorcalculation
channel (/MT)
 I/Ochannel:
GP10: 100, GP20-1: 100, GP20-2: 500
Calculation channel:
GP10: 50, GP20-1: 100, GP20-2: 200
• Loadingandwritingdatafrom/tothe
communicationchannel(/MC)
 Communicationchannel:
GP10: 50, GP20-1: 300, GP20-2: 500
• Implementationlevel:Level2
• Supportedprotocols:EIP/PCCC,EIP/native
• Numberofthesimultaneousconnection:Max.
10(Explicitmessage)
WTCOMMUNICATION(/E2)
 CollectsdatabyconnectingtoWTequipment
manufacturedbyYokogawaMeters&Instruments
Corp.viaEthernetcommunication*.
* The /MC option is required.
• Supportedmodels:WT1800E(commandtype
WT1800),WT1800,WT300E(commandmode
WT300),WT500,andWT300
• Numberofconnectableunits:
GP10: 8
GP20: 16
• Communicationcycle:500ms/1s/2s/5s/10s/20
s/30 s
• Typesofdatathatcanbeobtained:Voltage,
current,power,powerfactor,phase,electrical
energy,high-frequencywave,etc.
• Numberofdataallocations
GP20：300
GP10：50