EasyManua.ls Logo

York OPTIVIEW YK - Digital Outputs; FIGURE 85 - +5 VDC Digital Input; FIGURE 86 - Relay Outputs; FIGURE 87 - Triac Outputs

York OPTIVIEW YK
390 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
233
SECTION 27 - LARGE TONNAGE CHILLER (LTC) I/O BOARD 031-02895-000/001
FORM 160.54-M1
ISSUE DATE: 10/25/2019
JOHNSON CONTROLS JCI COMPANY CONFIDENTIAL
27
+5 VDC Digital inputs (-001 Board only)
There are 2 each +5 VDC TTL inputs. Figure 85 on
page 233 is a detail of an input and is representative
of all of these inputs. Each input accepts an open/close
input that can be configured in either pull-up configura-
tion (+5 VDC when open/0 VDC when closed) or pull-
down configuration (0 VDC when open/+5 VDC when
closed). It is connected between the +5 VDC and the DI
input for a pull-up configuration; between the GND and
DI input for a pull-down configuration. Under Program
control, the pull-up/pull-down selector switch connects
the input load resistor to either +5 VDC (pull-up) or
ground (pull-down) per the requirements of the input.
INPUT CONNECTION LED
DI7 TB21-1 +5 VDC CR26
-2 DI7
-3 GND
DI8 TB21-4 +5 VDC CR27
-5 DI8
-6 GND
DIGITAL OUTPUTS
Relay Outputs (-001 Board only)
There are 2 each 120/240 VAC relay contact outputs. Fig-
ure 86 on page 233 is a detail of an output and is rep-
resentative of all these outputs. Each relay has one set of
normally open contacts that are closed and opened under
Program control. The relay contact rating is 250 VAC, 5
amps resistive, 2 amps inductive. Each output is connected
between the respective COM(X) and NO(X) terminals.
OUTPUT CONNECTION
DO1 TB17-1 COM1
-2 NO1
DO2 TB16-1 COM2
-2 NO2
FIGURE 86 - RELAY OUTPUTS
LD14234
+12V
DO3
TB11
OPEN COLLECTOR
1
2
+12VDC
TB17
RELAY OUTPUTS
1
2
COM
DO1
NO
TB15
TRIAC OUTPUTS
1
2
RET
DO5
Triac Outputs (-001 Board only)
There are 4 each 24/120 VAC triac outputs. Figure 87
on page 233 is a detail of an output and is representa-
tive of all these outputs. Each output can switch 2 amps
at 17-132 VAC. Each output is connected between the
respective RET and DO(X) connection.
OUTPUT CONNECTION
DO5 TB15-1 Ret
-2 DO5
DO6 TB14-1 Ret
-2 DO6
DO7 TB13-1 Ret
-2 DO7
DO8 TB12-1 Ret
-2 DO8
FIGURE 87 - TRIAC OUTPUTS
LD14234
+12V
DO3
TB11
OPEN COLLECTOR
1
2
+12VDC
TB17
RELAY OUTPUTS
1
2
COM
DO1
NO
TB15
TRIAC OUTPUTS
1
2
RET
DO5
FIGURE 85 - +5 VDC DIGITAL INPUT
LD14233
OPTO
COUPLER
TB20
120VAC
1
2
DI1+
DI1-
TB21
5VDC TTL
1
2
3
5V
+5VDC
5.1K
DI7
GND
+5VDC
GND
PULL DOWN
SELECT FROM
PROCESSOR
TB21
5VDC TTL
1
2
3
5V
+5VDC
5.1K
DI7
GND
+5VDC
GND
PULL UP
SELECT FROM
PROCESSOR

Table of Contents

Related product manuals