ZCS AZZURRO HYD6000 - Page 41

User’s Manual 1PH HYD3000-HYD6000-ZSS
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 16/03/2021 - Application: GID
41/94
1. Set language
Select “1. Language”, then press “OK”. Press “Up” or “Down” to select the language, then press “OK.”
A quicker way: simultaneously press “Back” and “OK” to change the system language.
2. Set Time
Select “2. Time”, press “OK” to enter the menu for setting the time, the format is Year-Month-Day
Hours:Minutes:Seconds.
Press “Up” or “Down” to change the first digit, press “OK” to move to the next digit. After entering the current
time, press “OK.”
3. Energy Storage Mode
Select “3. Energy Storage Mode” and press “OK” to enter the interface for setting the energy storage mode.
3.Energy Storage Mode
“Up” ↑
“Down” ↓
1. Select automatic mode
2. Select charge mode
3. Select Time Zone mode
4. Select Passive Mode
1) Select automatic mode
Select “1. Select automatic mode,” then press “OK.”
In automatic mode, the inverter will automatically charge and discharge the battery.