User’s Manual 1PH HYD3000-HYD6000-ZSS
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 16/03/2021 - Application: GID
7. Once the photovoltaic system has been activated, check that:
a. The value of consumption shown on the screen remains constant as the photovoltaic
power increases.
b. Depending on the photovoltaic production, the system will operate according to its
working mode.
c. The value of PV production shown on the display is in line with the real photovoltaic
production visible on the photovoltaic inverter.
8. If the above are not verified, check the positioning of the CTs and the direction by consulting the
correct installation and initial start-up procedures.
To Next Page
Loading...
