Zebra MC9300 User Manual

Accessories
135
Installing the Hand Strap
To install the hand strap:
1. Thread and
pull‐throughtheshortsectionthroughthe opening near the base of the trigger handle.
Figure 116 Insert Loop Through Handle Slot
2. Thread and
pull‐throughthelongersectionthroughthe opening near the battery.
Figure 117 Pull-through Hand Strap Near Battery
3. Attach the two plastic ends together.
Figure 118 Attach Plastic Ends Together

Zebra MC9300 Specifications

General

Operating Temp	-4°F to 122°F / -20°C to 50°C
Processor	Qualcomm Snapdragon™ 660 octa-core, 2.2 GHz
Operating System	Android 8.1 Oreo
Display	4.3 inch WVGA (800 x 480), color display
RAM	4 GB
Storage	32 GB Flash
Connectivity	802.11 a/b/g/n/ac/d/h/i/r/k/w, Bluetooth 5.0
Camera	Optional 13 MP rear camera
Durability	IP65 and IP67 sealing
Memory	4 GB RAM/32 GB Flash
Touch Panel	Capacitive touch panel with Corning Gorilla Glass
Keypad Options	Alphanumeric, numeric and functional numeric keypads
Scanning	Integrated 1D/2D barcode scanner
Drop Specification	Multiple 8 ft. / 2.4 m drops to concrete at room temperature
Expansion Slots	MicroSD Card slot (supports up to 256 GB)
Battery	7000 mAh PowerPrecision+ Li-Ion rechargeable battery