EasyManuals Logo

Zebra MC9300 User Manual

Zebra MC9300
167 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
Using the Device
50
Alarms Only
To mute the device so that you hear alarms, choose Alarms only. This option does not mute sounds from
music, videos, games, or other media.
1. Swipe down with two fingers from the status bar to open the quick access panel.
2. Touch Do not disturb > Alarms only.
3. Choose Until you turn it off or select a time period.
4. Touch Done.
When Alarms Only is on, appears in the quick access panel and the Status Bar.
To turn off Alarms Only, open the Quick Access panel and touch Alarms only.
NOTE: To quickly turn on Alarms Only, with the screen on, press and hold the Volume Down button until the volume is all
the way down. Then, press Volume Down again to turn on Alarms Only.
To turn off Alarms Only, press either the Volume Up or Volume Down button and the touch END NOW in the
alert message.
Priority Notifications Only
To only be interrupted by important notifications, choose Priority only. This option does not mute sounds from
music, videos, games, or other media.
Before turning on Priority Only mode, set the notification priorities:
1. Swipe down from the status bar to open the quick settings bar and then touch .
2. Touch Sound > Do not disturb > Priority only allows.
3. Set priorities.
Alarms: Disabled by default.
Reminders and Events: Switch on or off.
Messages: Choose From anyone, From contacts only, From starred contacts only, or none. To
star contacts, use the Contacts applications.
Repeat callers: Choose whether to let the device ring if the same person calls again within 15 minutes.
After setting notification priorities, turn on Priority Only mode to limit interruptions. The priority notifications
make a sound or vibrate based on the current ringer volume, but other notifications will be silenced.
1. Swipe down with two fingers from the status bar to open the quick access panel.
2. Touch Do not disturb > Priority only.
3. Choose Until you turn it off or select a time period.
4. Tap Done.
When Priority Only is on, appears in the quick access panel and the Status Bar.
To turn off Priority Only, open quick access panel and touch Priority only.
Silence Sounds During Certain Times
To automatically silence the device during certain times, like at night or on weekends:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra MC9300 and is the answer not in the manual?

Zebra MC9300 Specifications

General IconGeneral
Operating Temp-4°F to 122°F / -20°C to 50°C
ProcessorQualcomm Snapdragon™ 660 octa-core, 2.2 GHz
Operating SystemAndroid 8.1 Oreo
Display4.3 inch WVGA (800 x 480), color display
RAM4 GB
Storage32 GB Flash
Connectivity802.11 a/b/g/n/ac/d/h/i/r/k/w, Bluetooth 5.0
CameraOptional 13 MP rear camera
DurabilityIP65 and IP67 sealing
Memory4 GB RAM/32 GB Flash
Touch PanelCapacitive touch panel with Corning Gorilla Glass
Keypad OptionsAlphanumeric, numeric and functional numeric keypads
ScanningIntegrated 1D/2D barcode scanner
Drop SpecificationMultiple 8 ft. / 2.4 m drops to concrete at room temperature
Expansion SlotsMicroSD Card slot (supports up to 256 GB)
Battery7000 mAh PowerPrecision+ Li-Ion rechargeable battery

Related product manuals