Accessories
119
Charging the Battery
1. Ensure that the cradle is connected to power.
2. Slide the device into the slot in the cradle. The devices Charge LED Indicator, indicates the battery charging
status. For charging status, see LED Charging Indicators.
Figure 98 Device Battery Charging
3. Gently press down on the device to ensure proper contact.
4. When charging is complete, remove the device from the cradle slot.
Charging the Spare Battery
1. Ensure that the cradle is connected to power.
2. Insert the spare battery into the charging well, small end first, onto the contact pins.
NOTE: To function properly, remove the lower part of the rubber boot or the entire rubber boot before placing in a
charging cradle.
To Next Page
Loading...
Need help?
General
