EasyManuals Logo

Zebra MC9300 User Manual

Zebra MC9300
167 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
Applications
63
Battery level - The current battery charge level as a percentage. Displays -% when level is unknown.
Time until full - The amount of time until the battery is fully charged.
Time since charging - The amount of time since the device began charging.
Time until empty - The amount of time until the battery is empty.
Battery status
Not charging - The device is not charging.
Charging over AC - The device is connected to AC power and charging.
Charging over USB - The device is connected to a host computer with a USB cable and charging.
Discharging - That the battery is discharging.
Full - That the battery is fully charged.
Unknown - The battery status is unknown.
Battery health - The health of the battery. If a critical error occurs, appears. Touch to view the error
description.
Decommission - The battery is past its useful life and should be replaced. See system administrator.
Good - The battery is good.
Charge error - An error occurred while charging. See system administrator.
Over Current - An over-current condition occurred. See system administrator.
Dead - The battery has no charge. Replace the battery.
Over Voltage - An over-voltage condition occurred. See system administrator.
Below Temperature - The battery temperature is below the operating temperature. See system
administrator.
Failure Detected - A failure has been detected in the battery. See system administrator.
Unknown - See system administrator.
Wear level - The health of the battery in graphical form. When the wear level exceeds 80%, the bar color
changes to red.
Table 8 Battery Icon Description
Battery
Icon
Description
Battery charge level.
Battery charging.
Battery charge level is below 15%.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra MC9300 and is the answer not in the manual?

Zebra MC9300 Specifications

General IconGeneral
Operating Temp-4°F to 122°F / -20°C to 50°C
ProcessorQualcomm Snapdragon™ 660 octa-core, 2.2 GHz
Operating SystemAndroid 8.1 Oreo
Display4.3 inch WVGA (800 x 480), color display
RAM4 GB
Storage32 GB Flash
Connectivity802.11 a/b/g/n/ac/d/h/i/r/k/w, Bluetooth 5.0
CameraOptional 13 MP rear camera
DurabilityIP65 and IP67 sealing
Memory4 GB RAM/32 GB Flash
Touch PanelCapacitive touch panel with Corning Gorilla Glass
Keypad OptionsAlphanumeric, numeric and functional numeric keypads
ScanningIntegrated 1D/2D barcode scanner
Drop SpecificationMultiple 8 ft. / 2.4 m drops to concrete at room temperature
Expansion SlotsMicroSD Card slot (supports up to 256 GB)
Battery7000 mAh PowerPrecision+ Li-Ion rechargeable battery

Related product manuals