94 R110Xi/R170Xi User Guide 12/6/04 23063L-003 Rev. 1
RFID Guidelines
^RZ
^RZ
Set RFID Tag Password
Description This command lets you define the password for the tag during writing.
Format
^RZp
The following table identifies the parameters for this format.
Important • Only certain tags support this feature, so check to ensure that this command can
be used with your particular tag type.
Parameters Details
p = password Accepted values: 00 to FF (hexadecimal)
Default value: 00
To Next Page
Loading...
Need help?
General
