Memory Cards
PCMCIA Memory Card
23063L-003 Rev. 1 12/6/04 R110Xi/R170Xi User Guide 111
3. Reinstall the PCMCIA card shield over the PCMCIA card and card slot.
The printer is ready to operate with the additional memory or font option. To be sure that
the card has successfully initialized, print a configuration label as instructed in Print a
Printer Configuration Label on page 32 and review it to see whether the new memory
card information is listed.
Note • The PCMCIA card may take a few minutes to initialize. The PAUSE light flashes
while the card initializes. If the card is already initialized, the PAUSE light flashes only
once or twice after the card is installed.
To Next Page
Loading...
Need help?
General
