Zebra TC8300 User Manual

Application Deployment
146
7. Swipe the screen up and select to view files on the Internal Storage.
8. Locate the application .apk file.
9. Touch the application file.
10. Touch Continue to install the app or Cancel to stop the installation.
11. To confirm installation and accept what the application affects, touch Install otherwise touch Cancel.
12. Touch Open to open the application or Done to exit the installation process. The application appears in
the App list.
Installing Applications Using the Android Debug Bridge
Use ADB commands to install application onto the device.
1. Ensure that the ADB drivers are installed on the host computer. See ADB USB Setup on page 144.
2. Connect the device to a host computer using USB. See USB Communication on page 38.
3. Go to Settings.
4. Touch System > Advanced > Developer options.
5. Slide the switch to the ON position.
6. Touch USB Debugging. The Allow USB debugging? dialog box appears.
7. Touch OK.
8. On the host computer, open a command prompt window and use the adb command:
adb install <application>
where: <application> = the path and filename of the apk file.
9. Disconnect the device from the host computer. See USB Communication on page 38.
Installing Applications Using a microSD Card
CAUTION: When connecting the device to a host computer and mounting its microSD card, follow the host
computer’s instructions for connecting and disconnecting USB devices, to avoid damaging or corrupting
files.
1. Copy the apk file to the root of the microSD card.
• Copy the apk file to a microSD card using a host computer (see USB Communication for more
information), and then installing the microSD card into the device (see Replacing the microSD Card
for more information).
• Connect the device with a microSD card already installed to the host computer, and copy apk file to
the microSD card. See USB Communication for more information. Disconnect the device from the
host computer.
2. Connect the device to a host computer using USB. See USB Communication.
3. Copy the application APK file from the host computer to the microSD card.
4. Remove the microSD card from the host computer.
5. Press and hold the Power button on the device until the menu appears.
6. Touch Power off.
7. Press and hold the Power button to turn on the device.

Zebra TC8300 Specifications

General

Display diagonal	4 \
Touch technology	Multi-touch
Touchscreen type	Capacitive
Display resolution	800 x 480 pixels
Display number of colors	16.78 million colors
USB 2.0 ports quantity	1
Flash memory	128 GB
Internal memory	8 GB
Internal memory type	-
Compatible memory cards	SDXC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Number of cores	2
Processor family	A110
Processor frequency	1.7 GHz
Battery capacity	6700 mAh
Operating system version	5.1
Operating system installed	Android
Data network	Not supported
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.0
Product color	Black
Phone function	No
International Protection (IP) code	IP65
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	64 mm
Width	76 mm
Height	233 mm
Weight	- g