Settings
43
• Scanner volume - Controls the scanner volume.
• Volume presets
• - Mutes the ring, notifications, and scanner so that the device does not make sounds or vibrate.
• - All sounds except media and alarms are silenced and vibrate mode is active.
• - Enables all sounds at the user defined levels.
• Do Not Disturb - Mutes some or all sounds and vibrations.
• Other sounds and vibrations
• Touch vibration - Vibrate the device when making screen selections (default – disabled).
Setting Wake-Up Sources
By default the device wakes from suspend mode when the user presses the Power button. The device can be
configured to wake when the user presses the PTT or Scan buttons on the device handle.
1. Go to Settings.
2. Touch Wake-Up Sources.
• GRIP_TRIGGER_2 - PTT button.
• SCAN - Scan button.
3. Touch a checkbox. A check appears in the checkbox.
4. Touch the Home button.
Remapping a Button
Buttons on the device can be programmed to perform different functions or as shortcuts to installed apps. For
a list of key names and descriptions, refer to: techdocs.zebra.com
.
NOTE: It is not recommended to remap the scan button.
1. Go to Settings.
2. Touch Key Programmer. A list of programmable buttons displays.
3. Select the button to remap.
4. Touch the BUTTON REMAPPING tab, the SHORTCUT tab, or swipe to touch the TRIGGERS tab that lists
the available functions, applications and triggers.
5. Touch a function or application shortcut to map to the button.
NOTE: If you select an application shortcut, the application icon appears next to the button on the Key
Programmer screen.
6. Touch the Home button.
Keyboards
The device provides multiple keyboard options.
• Android Keyboard - AOSP devices only
To Next Page
Loading...
Need help?
General
Weight and Dimensions
