EasyManuals Logo
Home>Zebra>PDA>TC8300

Zebra TC8300 User Manual

Zebra TC8300
177 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Getting Started
25
5-Slot Ethernet Cradle
5-Slot Charge Only Cradle with 4-Slot Battery Charger
5-Slot Ethernet Cradle with 4-Slot Battery Charger.
The 6,700 mAh battery charges from 0 - 90% in less than four hours at room temperature.
The 7,000 mAh battery charges from 0 - 90% in less than five hours at room temperature.
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). The device or accessory always
performs battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37
°C (+98 °F)) the device or accessory may for small periods of time alternately enable and disable battery
charging to keep the battery at acceptable temperatures. The device or accessory indicates when charging
is disabled due to abnormal temperatures via its red blinking LED.
1. To charge the main battery, connect the charging accessory to the appropriate power source.
2. Insert the device into a cradle or attach to a cable. The device turns on and begins charging. The
Charging/Scan LED lights amber while charging, then turns solid green when fully charged.
IMPORTANT: When trying to power on the device, a quick blink of the charging LED indicates that it does
not have enough battery power to turn on. You will need to charge the battery or replace it.
Powering on the Device
The device starts automatically as soon as power is applied; either with a charged battery installed or when
inserted into the cradle.
If a charged battery is installed and the device is turned off, press the Power button to turn on.
When the device is powered on for the first time, it initializes its system. The splash
screen appears for a
short period of time.
Table 2 Charging/Scan LED Charging Indicators
State Indication
Off Device is not charging. Device is not inserted correctly in the cradle or connected
to a power source. Charger/cradle is not powered.
Solid Amber Healthy battery is charging.
Solid Green Healthy battery charging is complete.
Fast Blinking Red
(2 blinks/second)
Charging error, such as:
- Temperature is too low or too high.
- Charging has gone on too long without completion (typically eight hours).
Solid Red Unhealthy battery is charging or fully charged.

Table of Contents

Other manuals for Zebra TC8300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra TC8300 and is the answer not in the manual?

Zebra TC8300 Specifications

General IconGeneral
Display diagonal4 \
Touch technologyMulti-touch
Touchscreen typeCapacitive
Display resolution800 x 480 pixels
Display number of colors16.78 million colors
USB 2.0 ports quantity1
Flash memory128 GB
Internal memory8 GB
Internal memory type-
Compatible memory cardsSDXC
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-20 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Number of cores2
Processor familyA110
Processor frequency1.7 GHz
Battery capacity6700 mAh
Operating system version5.1
Operating system installedAndroid
Data networkNot supported
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.0
Product colorBlack
Phone functionNo
International Protection (IP) codeIP65
Harmonized System (HS) code84713000
Weight and Dimensions IconWeight and Dimensions
Depth64 mm
Width76 mm
Height233 mm
Weight- g

Related product manuals