18
Getting Started
Introduction
This chapter describes the features of the device and explains how to install and charge the battery and
how to reset the device.
Unpacking
Carefully remove all protective material from the device and save the shipping container for later storage
and shipping.
Verify that box contains all the equipment listed below:
• TC8300
• Battery
• Regulatory Guide.
Inspect the equipment for damage. If you are missing any equipment or if you find any damaged
equipment, contact Support immediately. See Service Information on page 16 for contact information.
Removing the Screen Protective Film
A screen protection film is applied to the device’s screen to protect the screen during shipping. To remove
the screen protector, carefully lift the thin film off the display.
To Next Page
Loading...
