Printer Configuration and Adjustment
63
System > Settings > Screen Calibration
Touch each crosshair to calibrate the screen.
System > Settings > Restore Defaults
Restore specific printer, print server, and network settings back to the factory defaults. Use
care when loading defaults because you will need to reload all settings that you changed
manually. This menu item is available through two user menus with different default values for
each.
Accepted values: PRINTER—Restores all printer settings other than the network
settings back to the factory defaults. Use care when loading
defaults because you will need to reload all settings that you
changed manually.
NETWORK—Reinitializes the printer’s wired or wireless print
server. With a wireless print server, the printer also reassociates
with your wireless network.
LAST SAVED—Loads settings from the last permanent save.
Related ZPL command(s): PRINTER—
^JUF
NETWORK— ^JUN
LAST SAVED— ^JUR
Control panel key(s): PRINTER—Hold FEED + PAUSE during printer power-up to reset
the printer parameters to factory values.
NETWORK—Hold CANCEL + PAUSE during printer power-up to
reset the network parameters to factory values.
LAST SAVED—N/A
Printer web page: PRINTER—View and Modify Printer Settings > Restore Default
Configuration
NETWORK—Print Server Settings > Reset Print Server
LAST SAVED—View and Modify Printer Settings > Restore Saved
Configuration
To Next Page
Loading...