Zebra ZT411 - Page 66

Printer Configuration and Adjustment
66
Connection > Networks > IP Port
This printer setting refers to the internal wired print servers port number that the TCP print
service is listening on. Normal TCP communications from the host should be directed to this
port.
SGD command used:
internal_wired.ip.port
wlan.ip.port
Printer web page: View and Modify Printer Settings > Network Communications
Setup > TCP/IP Settings
Connection > Networks > IP Alternate Port
This command sets the port number of the alternate TCP port.
NOTE: Print servers supporting this command will monitor both the primary port and the
alternate port for connections at the same time.
SGD command used:
internal_wired.ip.port_alternate
wlan.ip.port_alternate
Printer web page: View and Modify Printer Settings > Network Communications
Setup > TCP/IP Settings