Printer Configuration and Adjustment
67
Connection > Networks > Print: Network Info
Prints the settings for any print server or Bluetooth device that is installed. The following is a
sample label.
Related ZPL command(s):
~WL
Control panel key(s): Do one of the following:*
• Hold CANCEL during printer power-up. (Formerly called a
CANCEL self test.
• Hold FEED + CANCEL for 2 seconds when the printer is in
the Ready state.
Printer web page: View and Modify Printer Settings > Print Listings on Label *
* Prints a printer configuration label and a network configuration label.
To Next Page
Loading...