Zebra ZT411 - Page 71

Printer Configuration and Adjustment
71
Connection > WLAN > WLAN Gateway
View and, if necessary, change the default wireless gateway.
To save changes to this setting, set Connection > WLAN > WLAN IP Protocol on page 70 to
PERMANENT, and then reset the print server (see Connection > Networks > Reset Network on
page 65).
Accepted values: 000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
wlan.ip.gateway
Printer web page: View and Modify Printer Settings > Network Communications
Setup > Wireless Setup
Connection > WLAN > WLAN Mac Address
View the Media Access Control (MAC) address of the wireless print server. This value cannot
be modified.
SGD command used:
wlan.mac_addr
Printer web page: View and Modify Printer Settings > Network Communications
Setup > Wireless Setup
Connection > WLAN > ESSID
The Extended Service Set Identification (ESSID) is an identifier for your wireless network.
Specify the ESSID for the current wireless configuration.
Accepted values: 32-character alphanumeric string (default 125)
SGD command used:
wlan.essid
Printer web page: View and Modify Printer Settings > Network Communications
Setup > Wireless Setup