Printer Configuration and Adjustment
73
Connection > Bluetooth > Bluetooth
Select if the printer is “Discoverable” for Bluetooth device pairing.
Accepted values: ON—Enables the Bluetooth radio.
OFF—Disables the Bluetooth radio.
SGD command used:
bluetooth.enable
Connection > Bluetooth > Bluetooth Discovery
Select if the printer is “Discoverable” for Bluetooth device pairing.
Accepted values: ON—Enables Bluetooth discoverable mode.
OFF—Disables Bluetooth discoverable mode.
SGD command used:
bluetooth.discoverable
Connection > Bluetooth > Friendly Name
This command sets the friendly name, which is used during service discovery. For changes to
take effect, you must power cycle the printer or issue the
device.reset command (see
Connection > Networks > Reset Network on page 65).
If you do not set a friendly name, it will default to the printer serial number.
Accepted values: 17-character text string
SGD command used:
bluetooth.friendly_name
To Next Page
Loading...