Zebra ZT610 - Page 103

103
Printer Configuration and Adjustment
Adjust Printer Settings
5/22/17 ZT600 Series™ User Guide P1088680-001
User Menus The following are the printer’s user menus and the menu items that appear in
each. Click any menu item to go to its description. For navigation instructions, see Navigating
through Screens in the Standard Display on page 19.
NETWORK
— ACTIVE PRINT SERVER
— PRIMARY NETWORK
— WIRED IP ADDRESS
— WIRED SUBNET MASK
— WIRED GATEWAY
— WIRED IP PROTOCOL
— WIRED MAC ADDRESS
— WLAN IP ADDRESS
— WLAN SUBNET MASK
— WLAN GATEWAY
— WLAN IP PROTOCOL
— WLAN MAC ADDRESS
— ESSID
— CHANNEL
— SIGNAL
— IP PORT
— IP ALTERNATE PORT
— PRINT INFORMATION**
— RESET NETWORK
— VISIBILITY AGENT
— LOAD DEFAULTS
— RFID MENU*
RFID
— RFID STATUS
— RFID CALIBRATE
— READ RFID DATA
— RFID TEST
— RFID PROGRAM POS.
— RFID ANTENNA
— RFID READ POWER
— RFID WRITE POWER
— RFID VALID COUNT
— RFID VOID COUNT
— LANGUAGE MENU*
TOOLS
— PRINT INFORMATION**
— IDLE DISPLAY
— POWER UP ACTION
— HEAD CLOSE ACTION
— LOAD DEFAULTS
— MEDIA/RIBBON CAL**
— DIAGNOSTIC MODE
— ENERGY STAR
— CONFIG INFO TO USB
— ZBI ENABLED?
— RUN ZBI PROGRAM
— STOP ZBI PROGRAM
— PRINT USB FILE
— COPY USB FILE TO E:
— STORE E: FILE TO USB
— PRINT STATION
— PASSWORD PROTECT
— APPLCTR ERR: PAUSE
— PRINT TEST FORMAT
— NETWORK MENU*
SETTINGS
— DARKNESS
— PRINT SPEED
— MEDIA TYPE
— PRINT METHOD
— TEAR OFF
— PRINT WIDTH
— PRINT MODE
— LABEL TOP
— LEFT POSITION
— REPRINT MODE
— LABEL LENGTH MAX
— COVER OPEN LIGHT
— MEDIA PATH LIGHTS
— RIBBON PATH LIGHTS
— LANGUAGE**
— TOOLS MENU*
* Denotes a shortcut to the next user menu.
** Appears in multiple user menus for your convenience.