Zebra ZT610 - Idle Display, Home Menu, and User Menus in the Standard Display

21
Introduction
Standard Control Panel
5/22/17 ZT600 Series™ User Guide P1088680-001
Idle Display, Home Menu, and User Menus in the Standard Display
The printer’s control panel includes a display, where you can view the printer’s status or
change its operating parameters. In this section, you will learn how to navigate through the
printer’s menu system and change values for menu items.
Idle Display After the printer completes the power-up sequence, it moves to the Idle Display
(Figure 5). The printer displays the current firmware version and its IP address.
Figure 5 • Idle Display
Home Menu Use the Home menu (Figure 6) to access the printer’s operating parameters
through the eight user menus (see Adjust Printer Settings on page 102). Click any of the icons
in Figure 6 to go to the descriptions of the menu items for that user menu.
Figure 6 • Home Menu
1
The printer’s current status
2
The printer’s firmware version (top line) and its IP
address (bottom line)
Home menu shortcut
Exit and return to the Idle Display (Figure 5).
1
2