Printer Configuration and Adjustment
Adjust Printer Settings
128
P1088680-001 ZT600 Series™ User Guide 5/22/17
TOOLS > DIAGNOSTIC MODE
Use this diagnostics tool to cause the printer to output the hexadecimal values for all data
received by the printer. For more information, see Communication Diagnostics Test
on page 239.
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ENERGY STAR
—
CONFIG INFO TO USB
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
APPLCTR ERR: PAUSE
—
PRINT TEST FORMAT
Accepted values: • DISABLED
• ENABLED
Related ZPL command(s):
~JD to enable, ~JE to disable
SGD command used:
device.diagnostic_print
Control panel key(s): Hold
PAUSE + FEED for 2 seconds when the printer is in the Ready state.
To Next Page
Loading...