105
Printer Configuration and Adjustment
Adjust Printer Settings
5/22/17 ZT600 Series™ User Guide P1088680-001
SETTINGS > DARKNESS
Set the print darkness to the lowest setting that provides good print quality. If you set the
darkness too high, the label image may print unclearly, barcodes may not scan correctly, the
ribbon may burn through, or the printhead may wear prematurely.
If desired, use the Optimal Darkness and Speed Test on page 237 to determine the best
darkness setting.
SETTINGS
—
DARKNESS
—
PRINT SPEED
—
MEDIA TYPE
—
PRINT METHOD
—
TEAR OFF
—
PRINT WIDTH
—
PRINT MODE
—
LABEL TOP
—
LEFT POSITION
—
REPRINT MODE
—
LABEL LENGTH MAX
—
COVER OPEN LIGHT
—
MEDIA PATH LIGHTS
—
RIBBON PATH LIGHTS
—
LANGUAGE
Accepted values: 0.0 to 30.0
Related ZPL command(s): ^MD, ~SD
SGD command used:
print.tone
Printer web page: View and Modify Printer Settings > General Setup > Darkness
To Next Page
Loading...