Zebra ZT610 - RFID WRITE POWER

167
Printer Configuration and Adjustment
Adjust Printer Settings
5/22/17 ZT600 Series™ User Guide P1088680-001
RFID > RFID WRITE POWER
If the desired write power is not achieved through RFID tag calibration, a value may be
specified.
RFID
—
RFID STATUS
—
RFID CALIBRATE
—
READ RFID DATA
—
RFID TEST
—
RFID PROGRAM POS.
—
RFID ANTENNA
—
RFID READ POWER
—
RFID WRITE POWER
—
RFID VALID COUNT
—
RFID VOID COUNT
Accepted values: 0 to 30
Related ZPL command(s): ^RW
SGD command used:
rfid.reader_1.power.write
Printer web page: View and Modify Printer Settings > RFID Setup > RFID WRITE PWR