Zebra ZT610 - Printing Specifications

Specifications
Printing Specifications
282
P1088680-001 ZT600 Series™ User Guide 5/22/17
Printing Specifications
ZT610 ZT620
Print resolution 203 dpi (dots/in.)/8 dots/mm 203 dpi (dots/in.)/8 dots/mm
300 dpi/12 dots/mm 300 dpi/12 dots/mm
600 dpi/24 dots/mm N/A
Maximum print width 203 dpi 4.09 in. (104 mm) 6.6 in. (168 mm)
300 dpi 4.09 in. (104 mm) 6.6 in. (168 mm)
600 dpi 4.09 in. (104 mm) N/A
Programmable constant print
speeds (inches per second/ips
or millimeters per second)
203 dpi 2 to 14 in. (50.8 to
355.6 mm) per second in
1-in. (25.4 mm) increments
2 to 12 in. (50.8 to
304.8 mm) per second in
1-in. (25.4 mm) increments
300 dpi 2 to 12 in. (50.8 to
304.8 mm) per second in
1-in. (25.4 mm) increments
2 to 8 in. (50.8 to 203.2 mm)
per second in 1-in.
(25.4 mm) increments
600 dpi 1 to 6 in. (25.4 to 152.4 mm)
per second in 1-in.
(25.4 mm) increments
N/A
Dot size (nominal)
(width x length)
203 dpi 0.0049 in. x 0.0049 in.
(0.125 mm x 0.125 mm)
0.0049 in. x 0.0049 in.
(0.125 mm x 0.125 mm)
300 dpi 0.0033 in. x 0.0039 in.
(0.084 mm x 0.099 mm)
0.0033 in. x 0.0039 in.
(0.084 mm x 0.099 mm)
600 dpi 0.0016 in. x 0.0016 in.
(0.042 mm x 0.042 mm)
N/A
First dot location
(measured from the inside
edge of the media)
203 dpi 0.14 in. ±0.05 in.
(3.5 mm ±1.25 mm)
0.10 in. ±0.035 in.
(2.5 mm ±0.9mm)
300 dpi 0.08 in. ±0.05 in.
(2.1 mm ±1.25 mm)
0.10 in. ±0.035 in.
(2.5 mm ±0.9mm)
600 dpi 0.08 in. ±0.05 in.
(2.1 mm ±1.25 mm)
N/A
Barcode modulus (X) dimension
Picket fence (non-rotated)
orientation
203 dpi 4.9 mil to 49 mil 3.3 mil to 49 mil
300 dpi 3.3 mil to 49 mil
600 dpi 1.6 mil to 16 mil N/A
Ladder (rotated)
orientation
203 dpi 4.9 mil to 49 mil 3.9 mil to 39 mil
300 dpi 3.9 mil to 39 mil
600 dpi 1.6 mil to 16 mil N/A