Printer Configuration and Adjustment
Adjust Printer Settings
178
P1088680-001 ZT600 Series™ User Guide 5/22/17
SENSORS > SELF ADJUST SENSOR
Enable this setting to have the printer attempt to detect media settings automatically. You may
still need to manually calibrate the printer if this setting does not detect your media correctly.
SENSORS
—
SENSOR TYPE
—
MEDIA/RIBBON CAL
—
PRINT INFORMATION
—
SELF ADJUST SENSOR
—
LABEL SENSOR
—
TAKE LABEL
Accepted values: • NO
• YES
SGD command used:
sensor.self_adjusting_enable
To Next Page
Loading...