Zebra ZT610 - Print a Test Label and Make Adjustments

97
Printer Setup and Operation
Print a Test Label and Make Adjustments
5/22/17 ZT600 Series™ User Guide P1088680-001
Print a Test Label and Make Adjustments
After you have loaded media, loaded ribbon (if using Thermal Transfer media), installed the
printer driver, and connected your printer to your computer, use the directions in this section to
print a test label. Printing this label allows you to see if your connection is working and if you
need to adjust any of the printer settings.
To print a test label and adjust the printer (if necessary), complete these steps:
1. Open the Zebra Setup Utilities to return to the Zebra Setup Utilities screen.
2. Click on one of the available print drivers for your printer.
3. Click Open Printer Tools.
The Tools window displays the available printer commands.